Technical Program
Exhibitor Seminars
• Detailed Calendar
• Paper Sessions
• Workshops
• Tutorials
• Live Sound Seminars
• Exhibitor Seminars
• Special Events
• Student Program
• Technical Tours
• Technical Council
• Standards Committee
• Heyser Lecture
|
AES Munich 2009
Exhibitor Seminar Details Friday, May 8, 11:00 — 12:00
ES1 - Optocore–A
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Technical introduction to OPTOCORE
The OPTOCORE Synchronous Fibre Network
Content: Introduction/Overview, design of the network, synchronicity, latency, topology, redundancy, protocol, devices.
Friday, May 8, 11:30 — 12:30
ES2 - KRK
Presenter:
Nils Karsten
Abstract:
Room Optimization with ERGO and Studio Monitor Design
Every room has his own characteristics. Especially these days it is important, to optimize the acoustics of the listening environment. An acoustically well treated environment is needed to ensure a well translating mix. ERGO makes any monitor system more accurate by reducing “bad” room sound. Besides the room acoustic also the speaker design has a fundamental impact on the radiation of the sound. The KRK design is known to built bullet-proof tools for the recording and mastering engineer to ensure to receive a well translating mix.
Friday, May 8, 12:00 — 13:00
ES3 - Optocore–B
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Basics of Fibre Optics
Technical, economical, safety aspects, and advantages of fibre optics.
Content: Fibre advantages, reliability, types of fibre, parameters of fibres (attenuation, bandwidth length product, latency), connector types, cleaning, and testing.
Friday, May 8, 13:00 — 14:00
ES4 - Optocore–C
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
OPTOCORE in Practice
Practical exercises with OPTOCORE system/devices
Content: Practical setup of a network, remote pre-amp control through third party
devices, transport of control data and Ethernet, software control and firmware upgrades.
Friday, May 8, 15:00 — 16:00
ES5 - Optocore–A
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Technical Introduction to OPTOCORE
The OPTOCORE Synchronous Fibre Network
Content: Introduction/Overview, design of the network, synchronicity, latency,
topology, redundancy, protocol, devices.
Friday, May 8, 16:00 — 17:00
ES6 - Optocore–B
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Basics of Fibre Optics
Technical, economical, safety aspects and advantages of fibre optics.
Content: Fibre advantages, reliability, types of fibre, parameters of fibres (attenuation, bandwidth length product, latency), connector types, cleaning, and testing.
Friday, May 8, 17:00 — 18:00
ES7 - Optocore–C
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
OPTOCORE in Practice
Practical exercises with OPTOCORE system/devices
Content: Practical setup of a network, remote pre-amp control through third party
devices, transport of control data and Ethernet, software control and firmware upgrades.
Saturday, May 9, 10:30 — 11:30
ES8 - Minnetonka Audio Software
Presenters:
Markus Hintz, Minnetonka Audio Software
Achim Scherner, DTS
Jayson Tomlin, Minnetonka Audio Software
Abstract:
SurCode Encoder for DTS-HD Workflow on Apple Final Cut Pro – Compressor
DTS HD has become a preferred audio format for Blu-ray production. DTS and Minnetonka will explain how authoring houses can increase workflow efficiency and make best use of available disc capacity for both Blu-ray and DVD-Video production.
Saturday, May 9, 11:00 — 12:00
ES9 - Optocore–A
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Technical Introduction to OPTOCORE
The OPTOCORE Synchronous Fibre Network
Content: Introduction/Overview, design of the network, synchronicity, latency,
topology, redundancy, protocol, devices.
Saturday, May 9, 11:30 — 12:30
ES10 - KRK
Presenter:
Nils Karsten
Abstract:
Room Optimization with ERGO and Studio Monitor Design
Every room has his own characteristics. Especially these days it is important to optimize the acoustics of the listening environment. An acoustically well treated environment is needed to ensure a well translating mix. ERGO makes any monitor system more accurate by reducing “bad” room sound. Besides the room acoustic also the speaker design has a fundamental impact on the radiation of the sound. The KRK design is known to built bullet-proof tools for the recording and mastering engineer to ensure to receive a well translating mix.
Saturday, May 9, 12:00 — 13:00
ES11 - Optocore–B
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Basics of Fibre Optics
Technical, economical, safety aspects, and advantages of fibre optics.
Content: Fibre advantages, reliability, types of fibre, parameters of fibres (attenuation, bandwidth length product, latency), connector types, cleaning, and testing.
Saturday, May 9, 13:00 — 14:00
ES12 - Optocore–C
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
OPTOCORE in Practice
Practical exercises with OPTOCORE system/devices
Content: Practical setup of a network, remote pre-amp control through third party
devices, transport of control data and Ethernet, software control and firmware upgrades.
Saturday, May 9, 14:30 — 15:30
ES13 - Minnetonka Audio Software
Presenters:
Markus Hintz, Minnetonka Audio Software
Jayson Tomlin, Minnetonka Audio Software
TBA, Dolby
Abstract:
File- and Tape-Based Workflows Using SurCode for Dolby E
SurCode for Dolby E is quickly becoming the standard for Dolby E software-based encoding and decoding. Minnetonka Audio Software will present how SurCode for Dolby E is the best choice for both file and tape based workflows on a variety of workstation platforms.
Saturday, May 9, 15:00 — 16:00
ES14 - Optocore–A
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Technical Introduction to OPTOCORE
The OPTOCORE Synchronous Fibre Network
Content: Introduction/Overview, design of the network, synchronicity, latency,
topology, redundancy, protocol, devices.
Saturday, May 9, 16:00 — 17:00
ES15 - Optocore–B
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Basics of Fibre Optics
Technical, economical, safety aspects, and advantages of fibre optics
Content: Fibre advantages, reliability, types of fibre, parameters of fibres (attenuation, bandwidth length product, latency), connector types, cleaning, and testing.
Saturday, May 9, 17:00 — 18:00
ES16 - Optocore–C
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
OPTOCORE in Practice
Practical exercises with OPTOCORE system/devices
Content: Practical setup of a network, remote pre-amp control through third party
devices, transport of control data and Ethernet, software control and firmware upgrades.
Sunday, May 10, 11:00 — 12:00
ES17 - Optocore–A
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Technical Introduction to OPTOCORE
The OPTOCORE Synchronous Fibre Network
Content: Introduction/Overview, design of the network, synchronicity, latency,
topology, redundancy, protocol, devices.
Sunday, May 10, 12:00 — 13:00
ES18 - Optocore–B
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Basics of Fibre Optics
Technical, economical, safety aspects, and advantages of fibre optics
Content: Fibre advantages, reliability, types of fibre, parameters of fibres (attenuation, bandwidth length product, latency), connector types, cleaning, and testing.
Sunday, May 10, 13:00 — 14:00
ES19 - Optocore–C
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
OPTOCORE in Practice
Practical exercises with OPTOCORE system/devices
Content: Practical setup of a network, remote pre-amp control through third party
devices, transport of control data and Ethernet, software control and firmware upgrades.
Sunday, May 10, 15:00 — 16:00
ES20 - Optocore–A
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Technical Introduction to OPTOCORE
The OPTOCORE Synchronous Fibre Network
Content: Introduction/Overview, design of the network, synchronicity, latency,
topology, redundancy, protocol, devices.
Sunday, May 10, 16:00 — 17:00
ES21 - Optocore–B
Presenters:
Martin Barbour, Optocore Support Engineer
Andreas Kaspar, Optocore Support Engineer
Thorsten Schulze, Optocore Support and Product Manager
Abstract:
Basics of Fibre Optics
Technical, economical, safety aspects, and advantages of fibre optics
Content: Fibre advantages, reliability, types of fibre, parameters of fibres (attenuation, bandwidth length product, latency), connector types, cleaning, and testing.
|
