The conventional design of an omnidirectional source uses a polyhedral speaker to emulate a spherical radiating sound wave. But this approach does not work at short distances and at higher frequencies. The inverse horn design proposed by Polack, a conventional loudspeaker matched to a small aperture through a reverse horn, provides a good approximation to an omnidirectional point source. But this solution has a rather irregular frequency response that arises from the acoustic resonances of the air inside the horn cavity. This research described two implementations of an equalized reverse horn source that have the desired directional characteristics of a point source with a flat frequency response of +/-3 dB from 100 Hz to 8 kHz. There are various trade-offs in selecting the sizes.

Authors: Ortiz, Santiago; Kolbrek, Bjørn; Cobo, Pedro; González, Leo M.; Colina, Carlos de la
Affiliations: Environmental Acoustics Group, ITEFI, CSIC, Madrid, Spain; Department of Electronics and Telecomunications NTNU-Norwegian University of Science and Technology, Trondheim, Norway; ETSI Navales, UPM, Madrid, Spain(See document for exact affiliation information.)
JAES Volume 62 Issue 5 pp. 345-354; May 2014
Publication Date: June 2, 2014 Import into BibTeX
Permalink: https://www.aes.org/e-lib/browse.cfm?elib=17245

Click to purchase paper as a non-member or login as an AES member. If your company or school subscribes to the E-Library then switch to the institutional version. If you are not an AES member and would like to subscribe to the E-Library then Join the AES!

This paper costs $33 for non-members and is free for AES members and E-Library subscribers.

Learn more about the AES E-Library

E-Library Location: (CD JAES62)   /jaes62/5/pg345.pdf

DOI: https://doi.org/10.17743/jaes.2014.0018

Start a discussion about this report!