Instrumentation for acoustical measurement usually starts with a transducer which converts the audio aound pressure into electrical quantities. The transducers or microphones are based on different principles of operation. One would invariably choose a condenser microphone when the whole frequency band has to be taken into consideration and when tolerances of flatness of response are tight. However, a condenser microphone needs an impedance converter (converting the high impedance at the input into a low impedance at the output) directly connected next to it, and vacuum tube preamplifiers have been used for this purpose for a long time. Their replacement by solid state amplifiers was felt to be a rather difficult problem. Some of the most important properties expected of a preamplifier are: high input impedance; low input capacitance; low output impedance; and low noise. A vacuum tube used as a cathode follower fulfills these reuqirements to a large extent. In order to avoid disturbances in the acoustical field to be measured-especially at higher frequencies-the dimensions of the whole microphone assembly have to be small. Efforts have been made to reduce the size of the condenser microphone cartridge, however the size of the preamplifier is practically limited by the size of the vacuum tube. Thus the replacement of the vacuum tube by solid state circuitry is urgently required, and the advantages one would gain from this are: more flexible cables; better gain (practically unity); and less microphonics.
https://www.aes.org/e-lib/browse.cfm?elib=1430
Click to purchase paper as a non-member or login as an AES member. If your company or school subscribes to the E-Library then switch to the institutional version. If you are not an AES member and would like to subscribe to the E-Library then Join the AES!
This paper costs $33 for non-members and is free for AES members and E-Library subscribers.
Learn more about the AES E-Library
Join the discussion about this paper! (1 comment)
