An electrodynamic loudspeaker was analyzed in three steps, (a) as a device supplied by the market, (b) removed upper suspension and (c) dismantled assembly consisting only of vibrating spider and voice coil. In three steps, resonant frequency and stiffness were measured dynamically for driving currents up to 100 mA, whereas stiffness was also measured quasi-statically by the use of calibrated masses. It was found that widely quoted effect of decreasing resonant frequency, as plotted against driving current, comes from the residual strain in the vibrating material, and significant contribution is associated with the spider. When driving current increases residual strain is gradually compensated, giving rise to the minimum of stiffness, and further increase of resonant frequency is attributed to a common nonlinearity in the forced vibrating system.

Authors: Djurek, Ivan; Petosic, Antonio; Djurek, Danijel
Affiliations: University of Zagreb, Zagreb, Croatia; Alessandro Volta Applied Ceramics (AVAC), Zagreb, Croatia;Faculty of EE and Computing(See document for exact affiliation information.)
AES Convention: 126 (May 2009) Paper Number: 7680
Publication Date: May 1, 2009 Import into BibTeX
Subject: Loudspeakers
Permalink: https://www.aes.org/e-lib/browse.cfm?elib=14876

Click to purchase paper as a non-member or login as an AES member. If your company or school subscribes to the E-Library then switch to the institutional version. If you are not an AES member and would like to subscribe to the E-Library then Join the AES!

This paper costs $33 for non-members and is free for AES members and E-Library subscribers.

Learn more about the AES E-Library

E-Library Location: (CD 126Papers)   /126/7680.pdf

Start a discussion about this paper!