AES E-Library

AES E-Library

Flexible Control of the Transducer and the Duct Resonance of a Speaker System Ducted to the Exterior of a Vehicle Cabin

Document Thumbnail

In order to reproduce lower frequency sound in a vehicle cabin efficiently, Zeljko Velican proposed a speaker system, where the backside of a transducer unit communicates with the exterior of a vehicle cabin via a tuned acoustic appliance. [1] Since this speaker system couples the interior and the exterior of a vehicle cabin, the efficiency and the frequency range of internal and external noise transmission are both important considerations. These two characteristics are strongly correlated with the two dominant resonances of the system. One is the mechanical resonance of the transducer which defines the lower limit of the sound reproduction frequency range. Another one is the Helmholtz resonance of the back-side acoustic appliance (enclosure and duct), which defines the frequency where, for example, noise transmission through the appliance is optimized. Choosing the appropriate acoustic parameters to balance those two dominant resonances is the key to optimal design this speaker system. But with the existing configuration [1], these two dominant acoustic resonances have strong mutual interaction via coupled design parameters, it can be difficult to find a good compromise between them. In this paper, a new speaker system configuration, consists of a transducer, an enclosure ducted to the exterior of the vehicle cabin, and a passive radiator to cover the duct, will be proposed and discussed. With this configuration, the two dominant resonances of the system can be controlled quasi-individually, therefore enhancing design flexibility for the practical use of such systems on a vehicle.

Authors:
Affiliations:
AES Convention: eBrief:
Publication Date:
Subject:
Permalink: https://www.aes.org/e-lib/browse.cfm?elib=19332

Click to purchase paper as a non-member or login as an AES member. If your company or school subscribes to the E-Library then switch to the institutional version. If you are not an AES member and would like to subscribe to the E-Library then Join the AES!

This paper costs $33 for non-members and is free for AES members and E-Library subscribers.

Learn more about the AES E-Library

The Engineering Briefs at this Convention were selected on the basis of a submitted synopsis, ensuring that they are of interest to AES members, and are not overly commercial. These briefs have been reproduced from the authors' advance manuscripts, without editing, corrections, or consideration by the Review Board. The AES takes no responsibility for their contents. Paper copies are not available, but any member can freely access these briefs. Members are encouraged to provide comments that enhance their usefulness.

Start a discussion about this paper!


AES - Audio Engineering Society