Comparison of nonlinearities between different earphone models is not directly possible due to their different sensitivities and the high dynamics in the transducer's frequency response. Also, nonlinearities are highly dependent on the level of the excitation signal. An approach to overcome these differences and allow for fair comparison is proposed. The method is based on filtering commonly used stimuli like pink sweeps with a linear correction filter. This filter is obtained by a measurement at low input levels where the transducer shows linear behavior. The nonlinear response is then measured at different levels and THD is computed. In this way the non-linearity or different transducers can be compared directly. Some examples demonstrating the performance of consumer grade earphones are presented and discussed. The results show that nonlinearities mainly appear for low frequency excitation.
https://www.aes.org/e-lib/browse.cfm?elib=17150
Click to purchase paper as a non-member or login as an AES member. If your company or school subscribes to the E-Library then switch to the institutional version. If you are not an AES member and would like to subscribe to the E-Library then Join the AES!
This paper costs $33 for non-members and is free for AES members and E-Library subscribers.
Learn more about the AES E-Library
The Engineering Briefs at this Convention were selected on the basis of a submitted synopsis, ensuring that they are of interest to AES members, and are not overly commercial. These briefs have been reproduced from the authors' advance manuscripts, without editing, corrections, or consideration by the Review Board. The AES takes no responsibility for their contents. Paper copies are not available, but any member can freely access these briefs. Members are encouraged to provide comments that enhance their usefulness.
Start a discussion about this paper!
