MS (mid-side) technique is a classic tool for recording and mastering based on coincident microphone setups. For these, localization theory tells us that on reproduction via loudspeakers, the interaural level differences (ILDs) will yield stable and fully mono-compatible results. Yet, when a mastering engineer obtains a mix, he will rarely be told how the specific sources were recorded. Was it as mono signals, level panned to a certain reproduction angle, or with coincident, spaced, or mixed stereo microphone setups. While the first two techniques only involve ILDs, spaced microphone techniques also imply interaural time differences (ITDs). MS matrixing techniques can be applied to change the apparent width of a full stereo mix in postproduction. The engineer should be aware that he then cross-feeds signals between the channels. The signal paths from a signal sound source, via the microphones, the matrixing, and the loudspeakers, to finally reach the ears, can now be seen as eight, instead of four for coincident techniques. An increased sensation of spaciousness or envelopment may arise, but one should be aware of the physics behind the process. Some of the arising comb filters are shown here, for spaced and ORTF setups.
https://www.aes.org/e-lib/browse.cfm?elib=16600
Click to purchase paper as a non-member or login as an AES member. If your company or school subscribes to the E-Library then switch to the institutional version. If you are not an AES member and would like to subscribe to the E-Library then Join the AES!
This paper costs $33 for non-members and is free for AES members and E-Library subscribers.
Learn more about the AES E-Library
The Engineering Briefs at this Convention were selected on the basis of a submitted synopsis, ensuring that they are of interest to AES members, and are not overly commercial. These briefs have been reproduced from the authors' advance manuscripts, without editing, corrections, or consideration by the Review Board. The AES takes no responsibility for their contents. Paper copies are not available, but any member can freely access these briefs. Members are encouraged to provide comments that enhance their usefulness.
Start a discussion about this paper!
