In This Section
- First Book in "AES Presents" Series from Focal Press
- New edition of Handbook for Sound Engineers, edited by Glen Ballou
- 137th Audio Engineering Society Convention Breaks Records and Draws Acclaim from Attendees, Exhibitors and Presenters Alike
- Convention reminds West-Coast audio community, “If It’s About Audio, It’s At AES!”
- AES 2014 Election Results
- The results are in!
- Time to Vote: 2014 AES Elections
- Deadline was Friday, July 11th
Edgar Villchur and the Acoustic Suspension Loudspeaker
|The AR-3 on display in the Smithsonian Information Age exhibit|
|Edgar Villchur in lab ca. 1965|
|Old and new enclosures, from Villchur 1962||AR catalog 1974 explaining acoustic suspension||
"A Laboratory Reference Standard Loudspeaker System" by Plach and Williams, old-style speaker was 52 inches high, from Audio, Oct. 1954,
p. 84 and p. 85
Villchur used two standard 12-inch Western Electric loudspeakers in designing his new enclosure. "I cut away part of the spider of one of them, making it more compliant. I also cut away the entire rim suspension and replaced it with a suspension made of mattress cover material (bacause it is very compliant, and adequately impervious to air). My wife, Rosemary, had worked as a draftsperson during WWII. With those skills, she was able to project my sketch of the three dimensional suspension to the correct pattern on the mattress material so that I could cut it out and form it to the shape I needed. I mounted the second Western Electric speaker on a baffle at the head of an enclosed stairway, so I could compare the performance of my acoustic suspension system with an enclosure volume of two cubic feet against and infinite baffle system with well over 100 cubic feet. The acoustic suspension system was substantially superior in fulness of bass, and especially in lack of distortion." (Birchall 1993)
|AR-1 "experimental enclosure, showing Fiberglas made up in cheesecloth-covered 'pillows.' The enclosed volume of air rather than mechanical suspensions, supplies elastic restoring force to the special 12-inch speaker.", in Audio, Oct. 1954||AR-1 ad on page 85 of Audio, Oct. 1954 emphasizing small dimenstions and ability to reproduce organ tones, for $185||AR-1 "assembled experimental speaker and enclosure", in Audio, Oct. 1954|
Villchur took his new design to two speak manufacturers but they were not interested. One of his former students, Henry Kloss, was interested. Previously, Villchur believed that creating a commercial product would require the resources of a major loudspeaker manufacturer. "After these two rebuffs, and in particular the nature of the rebuffs, I changed my mind," said Villchur. In the spring of 1954, Villchur drove Kloss up to his lab in Woodstock, describing the theory of his new design along the way. After they arrived, Villchur played some recordings, including an E. Power Biggs LP with copious low-frequency content. After hearing it, Kloss exclaimed, "That's it!" and offered the use of his Cambridge loft to manufacture acoustic suspension loudspeakers. "And thus, AR was born," observed Villchur." (Birchall 1993)
Acoustic Research in Cambridge started with $4000 that Kloss raised from his friends, plus $2000 from Villchur. Since they didn't have the capitalization to hire a production engineer to convert the prototype into a production model, Kloss worked out the details. "Henry was responsible for at least 75 percent of the production design of the AR-1. The rest was done by me and by Tony Hoffman, a physicist friend of Henry." They assembled several AR-1 loudspeakers in time for the New York Audio Show in September 1954. Although the critics were impressed with the clean 32-Hz organ pedal tones that the AR-1 could reproduce, they did not quite get the point. "One critic commented,' If your space is limited and you're looking for a small speaker, you should consider the AR-1 very seriously. It's a fine speaker - for its size.' Julian Hirsch, who at the time published the Audio League Report, wrote that 'the AR-1 had the lowest electroacoustic efficiency of any loudspeaker on the market - but at 25 Hz and below, it was more efficient that the Klipschorn, which had the highest efficiency of any speaker on the market.' Hirsch also said that the AR-1 'established a new industry standard for low distortion bass.' Eventually, the industry began to realize that the smaller size of the cabinet was only a secondary advantage of the extended bass response." (Birchall 1993)
The acoustic suspension speaker of Edgar Villchur has been considered one of the five most important speaker designs since the Rice-Kellog dynamic speaker of 1925. "What really caught the public fancy, however, was the fact that the original Acoustic Research AR-1 was a small loudspeaker system having essentially flat low-frequency response to- below the 40-Hz region. Other manufacturers were quick to point out that the AR-1 gobbled up about 10 times the electrical power needed by larger, more efficient systems. With 50- and 60-watt amplifiers becoming available, this turned out not to be a major drawback, and the trend toward smaller, less-efficient home loudspeaker systems was firmly established." (Augspurger 1987)
|AR-2 loudspeaker ad with press comments, from Audio, Oct. 1958||AR-2 loudspeaker ad, from Audio, Oct. 1958||AR-2 loudspeaker ad with picture of "Louis Armstrong in his den, editing tape (Note his AR-2 loudspeaker at the left)" from Audio, Oct. 1958|
Villchur lowered the cost of his speaker with the $89 AR-2 model introduced in 1956. The use of this small inexpensive speaker by such notables as Louis Armstrong was featured in AR's advertising. By 1958, Villchur added a new tweeter to the AR-3. "The dome tweeter was Villchur's answer to the problems of high frequency dispersion. 'When you are listening to a loudspeaker in a normally reverberant room, and that loudspeaker has excellent on-axis high-frequency response but depressed off-axis response, the loudspeaker will sound dull in any listening position in the room, including one directly on-axis, because the major part of the sound you hear is that reflected from the walls, floor and ceiling. Putting a dispersing lens in front of the driver doesn't help much because there isn't enough high-frequency energy to disperse. The secret of high-frequency dispersion can be stated in two words: small size. Shrinking a cone tweeter to a small size doesn't help because the voice coil becomes too small to handle any appreciable amount of power. I placed my voice coil at the large diameter of the diaphragm. When you do that, the shape of the diaphragm emerges almost naturally as a dome. That has the further advantage of making unnecessary a second suspension, and it also greatly facilitates solution of the other problems (irregular frequency response and response at the extreme high frequencies). Some years later, Roy Allison improved the dome tweeter by making one with a pulsating motion.'" (Birchall 1993)
Villchur himself wrote most of the advertising copy and brochures for the company in the 1950s and 1960s, emphasizing facts and performance. This style of the 1960s ads continued in the 1970s ads. Villchur sponsored "live vs. recorded" concerts to demonstrate the accuracy and low distortion of his speakers. "He placed the musicians (the Fine Arts String Quartet, among others) on the stage, with a pair of AR-3 loudspeakers behind them. At various points, they would stop playing and the taped performance would take over. Most reviewers of the day could not tell the difference between the live and recorded sound. 'I thought these concerts defined what we meant by high fidelity,' commented Villchur. He took care to use the best equipment possible at the time, including an Ampex tape deck, two 60-watt Dynakit amplifiers, and number 18 zip cord." (Birchall 1993)
Villchur left AR in 1967 to establish the Foundation for Hearing Aid Research where he developed hearing aids with a system combining compression and equalization that were manufactured by the Resound Corporation. He was appointed a Visiting Scientist at the Massachusetts Institute of Technology and would write numerous articles and books on acoustics that would be published by professional journals of the ASA, IEEE and AES and reprinted by university presses. He continues to live and work at his Foundation in Woodstock NY.
- Augspurger, George L. "Theory, Ingenuity, and Wizadry in Speaker Design," Audio, April 1987 p. 51-55, originally published in Journal of the Acoustical Society of America 77, No. 4, April 1985, p. 1303-1308.
- Birchall, Steve. "Acoustic Suspension," Journal of the Audio Engineering Society 41, November 1993, p. 970-971.
- Rice, Chester W. and Edward W. Kellogg, "Notes on the Development of a New Type of Hornless Loudspeaker," Transactions of the American Institute of Electrical Engineers 44, 1925, p. 461-475.
- Villchur, Edgar M. "Revolutionary Loudspeaker and Enclosure," Audio 38, October 1954, p. 25-27, 100.
- Villchur, Edgar M. "New High-Frequency Speaker," Audio 42, October 1958, p. 38.
- Villchur, Edgar M. Reproduction of Sound in High-Fidelity and Stereo Phonographs, rev. ed. New York: Dover Publications, 1965; 1st published in Cambridge, Mass.: Acoustic Research, 1962.
- Villchur, Edgar M. "A Short History of the Dynamic Loudspeaker," Voice Coil, July 2000, p. 26-32, paper presented at the 133rd meeting, Acoustical Society of America, June 1997.
- Photos courtesy of Tom Tyson, unless otherwise credited.
- 2001-2008 by Steven E. Schoenherr. All rights reserved.
Return to Recording Technology History | AR ads 1960s-1970s| Loudspeaker History| this page revised 4/12/08